Lantech C-2000 Case Erector

C-2000 UP TO 25 FEFCO 0201
CASES PER MINUTE

SQUARE CASES – NO JAMS

AUTOMATE AND CONTROL LTD INTEGRATING LANTECH CASE ERECTORS CLOSERS AND CASE PACKERS

Best in Class MMI (Material Machine Interface)
Up to 25 Cases per Minute with Servo Options

OPTIONS

Upgrade your system with LINC® to monitor machine data and performance from anywhere. LINC® utilizes an ultra-secure connection allowing customers to react to issues before they become problems.

Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.

Various communication configurations possible. Please contact Lantech for details.
The exit height of the cases can be extended in increments of 50 mm up to a maximum of 850 mm.
Holds additional tape head.
Increases the number of blanks the magazine holds.
Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
An alarm sounds to indicate the presence of a fault condition.

SPECIFICATION

Throughput Speed 8 Cases/Minute
(25 CPM option)

(Outside Dimensions) 200 mm L 150 mm W 150 mm C (7 7/8″ L x 5 7/8″ W x 5 7/8″ C)

(Outside Dimensions) 620 mm L
450 mm W
650 mm C
(24 1/2″ L x 17 3/4″ W x 25 5/8″ C)

Case Types RSC, HSC, FEFCO 0200/0201

Flute Types B, C, E or Combinations

Wall Types Single & Double Wall (test for multiple wall)

Tape Lantech TH-Series Hot Melt
Refer to Manufacturer Manual

Air Supply 6 Bar (80 Psi)

Dedicated Electric Service Req. US 230V, 3ph, 60Hz, Wye w/Ground

Dedicated Electric Service Req. EU 3L-PE-400V-50Hz-Neutral

Magazine infeed Capacity 200 Cases (approximate)

Weight 825 kg
(1820 lbs)

Dimensions 2235 mm L
2480 mm W
1800 mm H
(88″ L x 97 5/8″ W x 70 7/8″ H)

Outfeed Pass Height 600 mm +/- 30 mm
(23 5/8″ +/- 1 1/8″

Warranty Duration

3 Years, Unlimited Cycles – See Terms and Conditions. Parts Only

If you have any questions let us know

Do you have any questions? Write and our specialists will answer you.

Automate and Control Ltd 71–75 Shelton Street Covent Garden London – WC2H 9JQ +44 208 1333 585 www.automateandcontrol.com Email: sales@automateandcontrol.co.uk